MIS No. 100: PORIM Series 1 – PORIM Elite Oil Palm Planting Materials

Current oil palm planting materials grow at a rate of 40-75cm / yr. The palms are too tall after 20 years and harvesting is difficult. Breeding for short oil palms is one of the main priorities. PORIM has developed PORIM Series I (PS1) planting materials with slower height increment in PORIM-Nigerian germplasm collection (Rajanaidu et … Read more

MIS No. 99: Mobile Ramp – for Mainline Loading of Oil Palm Fresh Fruit Bunches

Mainline loading of oil palm fresh fruit bunches (FFB) is either done manually or mechanically. Methods currently practised by estates include: manual loading Net system loading (KULIM system) Platform ramp loading High-lift infield trailer loading Huka/Hook-lift concept loading In some of these loading systems, for example manual, net and platform ramp loading, the FFB are … Read more

MIS No. 98: The Supercrawler – an Infield Transporter for Difficult Areas

The SuperCrawler is a track machine designed for infoeld transportation of fresh fruit bunches (FFB) from palm base to roadside platform particularly in difficult areas. A vehicle with wheels normally has maneuvering problem in soft and soggy areas. The normal FFB evacuation produce in this soil conditions is to use wheelbarrow or manual carrying. In … Read more

MIS No. 97: Harvesting pole (Zirafah)

Efficient harvesting of fresh fruits bunches (FFB) plays a vital role towards improving the quality of harvested FFB. Harvesting of short palms (<3-metres in height) is a relatively simple operation. However harvesting of tall palms (> 3-metres in height) requires a different method and technique. A sickle attached to a long pole is normally used. … Read more

MIS No. 96: Palm Based Candle

Candles are mainly used in religious ceremonies such as in churches and temples. They are also widely used for decorative purposes in restaurants, festivities and even in wood-warmers in restaurants. Traditionally, beeswax and solid fats were used. However, the use of solid fats in candles was always objectionable because pyrolysis of these materials produced small … Read more

MIS No: 92: Automotive Components : Thermoformable Plastic Composites from Op – Fibre

The oil palm industry in Malaysia is producing more than 30 million tonnes of cellulosic materials from oil palm fronds (OPF), empty fruit bunches (EFB) and felled trunk (OPT) each year. The availability of oil palm biomass amounts to seven times the total wood used in Malaysia. Therefore, the wood-based industry should consider using more … Read more

MIS No. 91: Op- Fibre Moulded Plastic Composites

Malaysia has more than 3.01 million hectares under oil palm cultivation in 1998. Besides producing palm and kernel oils, the industry also generates more than 30 million tonnes annually of biomass (EFB) and trunks (OPT) in harvesting, processing and replanting the crop, respectively. About two fronds are pruned from each palm per month during harvesting of … Read more

MIS No. 90: Solvent Extraction of Oil Palm Biomass using the Alcell Process

The paper industry use large and expensive equipment. For example, the cost of a single paper machine complex runs close to US$300 million and a fully-integrated bleached kraft pulp and paper mill costs almost US$1.5 billion. Such capital requirements for the construction of a conventional pulp mill has caused many investigators to take a fresh look … Read more